Toshiba TS3000 Series - Input Correction [BS]

OPERATOR’S MANUAL
series Robot Controller
4.2.4 Input Correction [BS]
(1) Function
While the character input mode is selected, one (1) character just before the
cursor position can be deleted on the editing display.
This function is useful for deleting an error just after key entry.
(2) Procedures
(a) Step 1: Input correction.
Press the BS key, and one (1) character just before the cursor position is
deleted with successive characters on the same line shifted left in turn.
P R G R A M . N A M C : 6 L : 1 1
P R O G R A M T E S T
S P E E D = 5 0
M O V E A
M O V E B
M O V E C _
S A V E D E D I T J U M P F I N D C H A N G >
Press the BS key and the following displays appears.
P R G R A M . N A M C : 5 L : 1 1
P R O G R A M T E S T
S P E E D = 5 0
M O V E A
M O V E B
M O V E _
S A V E D E D I T J U M P F I N D C H A N G >
STE 80720
– 4-11 –