Trane TR200 Series - Page 175

16-54 Feedback 1 [Unit]
Range: Function:
0.000
Proc-
essCtrlU-
nit*
[-999999.999 - 999999.999
ProcessCtrlUnit]
View value of Feedback 1, see par. 20-0*
Feedback .
The value is limited by settings in par.20-13
Minimum Reference/
Feedb. and par.20-14 Maximum Reference/Feedb.. Units as set in par.
20-12
Reference/Feedback Unit.
16-55 Feedback 2 [Unit]
Range: Function:
0.000
Proc-
essCtrlU-
nit*
[-999999.999 - 999999.999
ProcessCtrlUnit]
View value of Feedback 2, see par. 20-0*
Feedback .
The value is limited by settings in par. 20-13 and par. 20-14. Units as set
in par.20-12
Reference/Feedback Unit.
16-56 Feedback 3 [Unit]
Range: Function:
0.000
Proc-
essCtrlU-
nit*
[-999999.999 - 999999.999
ProcessCtrlUnit]
View value of Feedback 3, see parameter group 20-0*
Feedback .
The value is limited by settings in par.20-13
Minimum Reference/
Feedb. and par.20-14 Maximum Reference/Feedb.. Units as set in par.
20-12
Reference/Feedback Unit.
16-58 PID Output [%]
Range: Function:
0.0 %* [0.0 - 100.0 %] This parameter returns the Drive Closed Loop PID controller output value
in percent.
Parameter Description
174 TR200 Programming Guide