Trane TR200 Series User Manual

[2] Coast inverse
[3] Coast and reset inv
[5] DC-brake inverse
[6] Stop inverse
[7] External interlock
[8] * Start
[9] Latched start
[10] Reversing
[11] Start reversing
[14] Jog
[15] Preset reference on
[16] Preset ref bit 0
[17] Preset ref bit 1
[18] Preset ref bit 2
[19] Freeze reference
[20] Freeze output
[21] Speed up
[22] Speed down
[23] Set-up select bit 0
[24] Set-up select bit 1
[34] Ramp bit 0
[36] Mains failure inverse
[37] Fire Mode
[52] Run permissive
[53] Hand start
[54] Auto start
[55] DigiPot increase
[56] DigiPot decrease
[57] DigiPot clear
[62] Reset Counter A
[65] Reset Counter B
[66] Sleep Mode
[67] No Flow
[78] Reset Maint. Word
5-11 Terminal 19 Digital Input
Same options and functions as 5-1*, except for Pulse input .
Option: Function:
[0] * No operation
Parameter Description
TR200 Programming Guide 93

Trane TR200 Series Specifications

General

Input Voltage	24 VAC
Frequency Range	50/60 Hz
Communication Protocols	BACnet MS/TP, Modbus RTU
Controller Type	Programmable
Power Range	20 VA
Control Method	PID Control
Enclosure Rating	IP20
Operating Temperature	32°F to 122°F (0°C to 50°C)
Humidity Range	5% to 95% non-condensing
Memory	Non-volatile