CTV-SVU01B-EN • Tracer AdaptiView Display Operations Guide 11
Introduction
Animated graphic
A graphic of a chiller appears on the home page. The graphic uses animation to indicate
the operational status of the chiller. If the chiller is running, animation appears within the
cutaway areas of the compressor, the evaporator, and the condenser, as shown in
Figure 1, p. 7. If the chiller is not running, the components are enclosed and are not
animated.
The chiller graphic that appears also indicates the type of chiller that the Tracer
AdaptiView display is monitoring. The types of chillers that can be graphically
represented on the display are:
• 2-stage compressor, cooling only (as shown in Figure 1)
• 2-stage compressor with auxiliary condenser
• 2-stage compressor with heat recovery
• 3-stage compressor, cooling only
• 3-stage compressor with auxiliary condenser
• 3-stage compressor with heat recovery
Screen saver
After 30 minutes of inactivity, the screen saver (Figure 2) appears and the screen dims.
The screen saver also appears if you touch the animated graphic on the home screen.
Alternately, if you touch the screen saver, the home screen appears.
Figure 2. Screen saver
Better graphic to come
To Next Page
Loading...
