CTV-SVU01B-EN • Tracer AdaptiView Display Operations Guide 55
Security Settings
Disabling/Enabling Security
The Tracer AdaptiView display gives you the ability to disable or enable the security
feature that allows a user to log in and log out.
To disable security, you must be logged in:
1. From the Settings screen, touch the Security button. The Security screen appears
(Figure 33).
Note: If you are logged out, the Log in screen appears.
2. Touch the Disable button. The button becomes shaded.
3. Touch Save. The Settings screen appears with only the Security button visible. The
Log in/Log out button is gone.
To enable security:
1. From the Settings screen, touch the Security button. The Security screen appears
(Figure 33).
2. Touch the Enable button. The button becomes shaded.
3. Touch Save. The Settings screen appears with a Log out button, in addition to the
Security button.
Figure 33. Security screen