56 Tracer AdaptiView Display Operations Guide • CTV-SVU01B-EN
Security Settings
Logging In
To log in:
1. Touch t h e Log in button. The Log in screen appears (Figure 34).
2. Use the keypad to enter your PIN.
• The PIN is a four-digit number, which was configured for your system with the
Tracer TU service tool.
• As you enter the number, the PIN remains hidden by asterisks.
Note: If you enter an invalid PIN, an error message appears on the Log in screen.
3. Touch Save.
• If you viewed the Log in screen from touching Log in on the Settings screen, the
Settings screen appears with a Log out button on it.
• If the Log in screen appeared when you tried to change a setting, you return to that
setting screen.
Note: The PIN is valid until 30 minutes of inactivity pass, or until you log out.
Figure 34. Log In Screen
To Next Page
Loading...
Need help?
General
