CTV-SVU01B-EN • Tracer AdaptiView Display Operations Guide 5
Introduction
The Tracer AdaptiView™ display provides a means for viewing data and for making
operational changes on CenTraVac™ chiller models CVHE, CVHF, and CVHG.
The purpose of this guide is to assist you in using the Tracer AdaptiView display. The
guide describes how to access the screens and the types of information that appear on
the screens.
Equipment Description
The basic equipment features of the Tracer AdaptiView display are described here.
Hardware
The Tracer AdaptiView display is mounted on or near the chiller control panel. It can be
attached to the chiller by an arm that can extend 11 inches. Five pivot points enable full
articulation as described in the following specifications and in the illustration:
• Two horizontal pivots points 90º right or left (180º total)
• Two vertical pivots points: 90º degrees up or down (180º total)
• Rotation: 135º clockwise and 135º counterclockwise (270º total)
To Next Page
Loading...
