CTV-SVU01B-EN • Tracer AdaptiView Display Operations Guide 59
Appendix A: Component Screen Data
The following list contains all of the settings and status points that are available for
viewing on the Tracer AdaptiView display. Chiller configuration determines which ones
appear on the display.
Component Settings and status points
Evaporator Active Chilled Water Setpoint (button links to the Active Chiller Water Setpoint screen)
Evap Water Pump (button links to Evaporator Water Pump Override screen)
Evap Water Flow Switch
Evap Leaving Water Temp
Evap Entering Water Temp
Approximate Chiller Capacity
Evap Sat Rfgt Temp
Evaporator Rfgt Pressure
Evap Approach Temp
Approx Evap Water Flow
Evap Differential Wtr Press
Condenser Active Hot Water Setpoint (button links to the Active Hot Water Setpoint screen)
Cond Water Pump (button links to the Condenser Water Pump Manual Override screen)
Condenser Water Flow Switch Status
Cond Entering Water Temp
Cond Leaving Water Temp
Outdoor Air Temp
Cond Sat Rfgt Temp
Cond Rfgt Pressure
Cond Approach Temp
Approx Cond Water Flow
Cond Differential Wtr Press
Second Condenser Lvg Wtr Temp
Second Condenser Ent Wtr Temp
To Next Page
Loading...
Need help?
General
