60 Tracer AdaptiView Display Operations Guide • CTV-SVU01B-EN
Appendix A: Component Screen Data
Compressor Compressor Running Status
Compressor Control Signal
Oil Pump
Average Line Current
Oil Pump Status
Oil Differential Pressure
Starts
Running Time
Oil Pump Discharge Pressure
Oil Tank Pressure
Oil Tank Temperature
Inboard Bearing Temperature
Outboard Bearing Temperature
IGV1 Position (%)
IGV1 Position (Steps)
IGV2 Position ((%)
IGV2Position (Steps)
Compressor Rfgt Discharge Temp
HGBP Time
Motor Active Current Limit Setpoint (button links to Active Current Limit Setpoint screen)
Average Line Current
ADF Frequency or Generator Frequency Command (based on configuration)
Starter Current L1 (%RLA)
Starter Current L2 (%RLA)
Starter Current L3 (%RLA)
Starter Current L1 (A)
Starter Current L2 (A)
Starter Current L3 (A)
Starter Voltage AB
Starter Voltage BC
Starter Voltage CA
Motor Winding Temp #1
Motor Winding Temp #2
Motor Winding Temp #3
Component Settings and status points
To Next Page
Loading...
