16 RMWH-SVX001C-EN
Initial Setup
WARNING
Risk of Asphyxiation!
Failure to follow instructions below could cause
inaccurate readings and improper gas monitoring
which could result in death or serious injury.
Make sure to remove the cap from the exhaust port
before o
perating the device.
Remove the protective film from the touchscreen.
When p
ower is supplied to the device, the green
power
indicator LED (refer to preceding figure) illuminates and
the touchscreen shows a logo and a loading bar. The
loading bar indicates the status of the initializing process.
If an error occurs during start-up, a pop-up identifies the
specific problem.
Language/Date & Time/Password
1. On the Initial Setup screen, select Language/Date &
Time/Password.
2. On the Language Setup screen, select the
appropriate language, then select Next.
When a language is selected, the chang
e is
instantaneous.
3. On the Date & Time Setup screen, select the Date
tab.
The date format can be MM/DD/YYYY or DD/MM/YYYY
dependin
g on the language setting.
4. Select the Month/Day/Year fields, and use the
alphanumeric keypad pop-up to enter values.
Select
to accept the values.
Note: An entry for the date is necessary to continue.
If this error pop-up shows, select OK to return
to the previous screen and supply a value.
5. Select the Time tab.
To Next Page
Loading...
