Maintenance overview
07/2019 244156V03_EN 91
10.3 Maintenance overview
10.4 Visual inspection of seal
There is a circumferential seal in the area of the knife drive in the knife box.
1. Perform a visual inspection of the seal (1).
2. If the seal is damaged or you can establish abrasion: Contact TREIF
Customer Service to arrange replacement of the seal.
Component/assembly Interval Activity see page
daily
semi-annually
annually
every 3000 hours
every 4 years
Power cable and plug X Visual inspection; replace in the case of damage
Hoods, door and cov-
ers
X Visual inspection; replace in the case of damage
Blade X Check for wear and damage such as recognisable
breaks and cracks or scratches of the coating.
Sharpen blunt blades
Replace damaged blades page 92
Safety switches for the
safety equipment
X Function test page 41
Safety-related parts X Check
Blade position X Check the blade position;
decommission the machine in case of a faulty blade
position and notify TREIF Service.
Blade brake X Have it inspected by TREIF Service
Toothed belt X Have it inspected by TREIF Service
To Next Page
Loading...
