Completion work after the cleaning
86 07/2019 244156V03_EN
9.6 Completion work after the cleaning
Lifting removal chamber:
1. Lift the removal chute 1 to the top end position (working position) and
hold it in this position from underneath with one hand.
2. Secure the two locks so that the removal chamber is held securely.
Inserting crumb tray:
1. Insert the crumb tray 1 at the bottom into the blade box.
2. Close the front door ( “Closing front door:” on page 87).
1
AR1019 / 0
To Next Page
Loading...
