Safety instructions for operation
48 07/2019 244156V03_EN
7.1 Safety instructions for operation
WARNING
Action in the case of danger!
Hazards arising from the machine for the operator and the machine must
be dealt with immediately.
Press the master switch or open any cover to interrupt the cutting
process immediately.
CAUTION
Risk of injury on the upright knife!
If you open any cover or the blade box cover during a running cutting op-
eration, the machine will switch off and the blade will stop immediately. The
blade can come to a stop in the chute and you can injure yourself on the
stopped blade.
Wear personal protective equipment.
CAUTION
Risk of injury on the product holder!
There is the danger of puncturing or piercing hands and fingers when work-
ing on and handling the product holders!
Make sure when closing the product holder that there are no hands
and fingers in the hazard zone!
To Next Page
Loading...
