EC Declaration of Conformity
For the purpose of the EC Machinery Directive 2006/42/EC, Annex II No. 1 A.
Machinery category:
Bread slicer
Machine designation:
PRIMUS - Black Edition -
Series / part number:
690003.236951.-
We hereby declare that the design of the above mentoined machine in the supplied version
complies with the applicable provisions of the EC Machinery Directive 2006/42/EC.
The machine also complies with the following Directives / Regulations
EU EMC Directive 2014 / 30 / EU
EC Regulation for Food Contact Materials 1935 / 2004 / EC
EU Plastic Regulation for Food Contact Materials 10 / 2011 / EU
The protection objectives of the Low Voltage Direcitve 2014/35/EU have been complied with
in accordance with Annex I, No. 1.5.1 of the Machinery Directive 2006/42/EC.
The following harmonised standards have been applied:
DIN EN 13954: 2010-12: Fo od processing machinery –
Bread slicers –
Safety and hygiene requirements
The normative references in the European standard mentioned above are also applicable, such as:
DIN EN ISO 12100: 2013-08: Safety of machinery –
General principles for design –
Risk assessment and risk reduction
DIN EN ISO 13849-1: 2016-06: S afety of machinery –
Safety-related parts of control systems –
General principles for design
DIN EN ISO 13857: 2008-06: Safety of machinery –
Safety distance to prevent hazard zones being reached by
upper and lower limbs
DIN EN 60204-1: 2010-05:
[IEC 60204-1: 2005, modified]
Safety of machinery –
Electrical equipment of machines –
General requirements
The bread slicer is exclusively intended fo r slicing various types of bread and/or bread-like
products. Any other use of the machine is prohibited.
Refer to the operating instructions for detaile d information about the specification and the
ambient conditions.
This declaration shall be rendered invalid if any modificationwithout our agreement is made
to the machine.
The following person is authorised to compile the technical
documentation:
Jörg Fankhänel
Toni-Reifenhäuser-Str. 1
57641 Oberlahr
TREIF Maschinenbau GmbH
Toni-Reifenhäuser-Str. 1
D – 57641 Oberlahr
Oberlahr, 02. Mai 2019
Werner Roth – Plant Manager]
TREIF – ID – NR. 245036
Translation of the original declaration of conformity
691003.236954.-
To Next Page
Loading...
