Menü „Service“
07/2019 244156V03_EN 69
Manual movement of the blade to a changed cleaning position (alter-
native)
In addition, you can also move the blade manually to a changed cleaning
position.
1. Close the infeed cover
2. Adjust the position of the blade using the rotary pushbutton.
- The infeed cover is locked automatically.
3. Press the rotary pushbutton twice in sequence.
- The locking of the infeed cover opens automatically.
4. Open the infeed cover.
Automatic movement of the blade to a changed cleaning position (al-
ternative)
In addition, you can also move the blade automatically to a changed clean-
ing position.
1. Close the infeed cover
2. Press one of the start/stop buttons.
- The infeed cover is locked automatically.
- One blade rotation is executed.
- The locking of the infeed cover opens automatically.
3. Open the infeed cover.
Leaving the cleaning position after cleaning
After cleaning has been performed, the blade must be moved to its working
position.
1. Close the infeed cover.
2. Press and hold the rotary pushbutton for approx. 3 seconds.
- The blade leaves its cleaning position and moves to its working po-
sition.
3. Perform an initialization of the machine.
To Next Page
Loading...
