Completion work after the cleaning
88 07/2019 244156V03_EN
WARNING
Risk of injury from not recognisable danger areas!
Safety signs that are not legible or not present cannot warn the user about
risks.
Check the safety signs after every each cleaning process.
The safety signs must be legible and complete.
Replace any missing or illegible safety signs.
Final inspection
1. Check the safety signs after each cleaning.
- An overview of the safety signs can be found in chapter “Infor-
mation signs on the machine” on page 14.
2. Check whether all reinstalled parts have been fastened correctly.
3. Now carry out a function test of the safety switches ( “Functional test
of the safety switches” on page 41)
To Next Page
