EasyManua.ls Logo

Triple E COMMANDER Series - FIRE EXTINGUISHER

Default Icon
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6-2
6.1.2 FIRE EXTINGUISHER
1. Function:
a. Fire extinguishers are designed to put
out a re in its initial stages. Once a
re is out of control and you cannot
get within ten feet, it is probably too
big to ght with your extinguisher.
b. Do not discharge your re extinguisher
to test it. Once it is discharged even
for a few seconds it will lose pressure
and become useless.
c. Check the pressure indicator on your
re extinguisher periodically and
record the inspection date on the tag
provided. It if loses pressure, the dry
chemical cannot be discharged eec-
tively. If the pointer does not indicate
in the green, replace the extinguisher
immediately.
2. Operation:
a. Stay at least 6 feet away from the re
and near an exit. The chemical from
the re extinguisher will shoot at least
10 feet. Stay close to the oor to avoid
heat and fumes.
b. Break the seal; grasp the re extin-
guisher rmly holding it in an upright
position.
c. Press the white button. Aim at the
base of the re spraying the entire
base area. Don't spray at the smoke or
ames.
d. After the re is out, watch for “ash-
back”.
e. Discharge the re extinguisher entirely
and get it recharged or replaced im-
mediately.
f. For additional information, check in
the manual that is provided with the
Fire Extinguisher.
Fig. 6-1 FIRE EXTINGUISHER
COMMANDER / EMBASSY
6-2
6.1.2 FIRE EXTINGUISHER
1. Function:
a. Fire extinguishers are designed to put
out a re in its initial stages. Once a
re is out of control and you cannot
get within ten feet, it is probably too
big to ght with your extinguisher.
b. Do not discharge your re extinguisher
to test it. Once it is discharged even
for a few seconds it will lose pressure
and become useless.
c. Check the pressure indicator on your
re extinguisher periodically and
record the inspection date on the tag
provided. It if loses pressure, the dry
chemical cannot be discharged eec-
tively. If the pointer does not indicate
in the green, replace the extinguisher
immediately.
2. Operation:
a. Stay at least 6 feet away from the re
and near an exit. The chemical from
the re extinguisher will shoot at least
10 feet. Stay close to the oor to avoid
heat and fumes.
b. Break the seal; grasp the re extin-
guisher rmly holding it in an upright
position.
c. Press the white button. Aim at the
base of the re spraying the entire
base area. Don't spray at the smoke or
ames.
d. After the re is out, watch for “ash-
back.
e. Discharge the re extinguisher entirely
and get it recharged or replaced im-
mediately.
f. For additional information, check in
the manual that is provided with the
Fire Extinguisher.
Fig. 6-1 FIRE EXTINGUISHER
COMMANDER / EMBASSY

Table of Contents

Related product manuals