EasyManua.ls Logo

Triple E COMMANDER Series - Battery Condition Meter; Trailer Wiring Connector

Default Icon
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10-10
10.3.5
BATTERY CONDITION METER
You will nd a gauge on your control panel
which tells you the level of charge in your
coach or auxiliary batteries.
10.4 TRAILER WIRING CONNECTOR
Your motorhome is ready for trailer or car tow-
ing. It has a wiring connector plug at the back
for quick hook-up.
Refer to the labeled diagram of the various
terminals in the plug. These are standard for all
7-pin trailer plugs.
If you intend to tow a trailer with electric brakes
a brake controller is required. This can be in-
stalled by your dealer.
If you intend to tow a trailer with electric brakes
a brake control kit is required. This can be in-
stalled by your dealer.
Fig. 10-13 BATTERY CONDITION METER
Fig. 10-14 TRAILER WIRING CONNECTOR
COMMANDER / EMBASSY
10-10
10.3.5
BATTERY CONDITION METER
You will nd a gauge on your control panel
which tells you the level of charge in your
coach or auxiliary batteries.
10.4 TRAILER WIRING CONNECTOR
Your motorhome is ready for trailer or car tow-
ing. It has a wiring connector plug at the back
for quick hook-up.
Refer to the labeled diagram of the various
terminals in the plug. These are standard for all
7-pin trailer plugs.
If you intend to tow a trailer with electric brakes
a brake controller is required. This can be in-
stalled by your dealer.
If you intend to tow a trailer with electric brakes
a brake control kit is required. This can be in-
stalled by your dealer.
Fig. 10-13 BATTERY CONDITION METER
Fig. 10-14 TRAILER WIRING CONNECTOR
COMMANDER / EMBASSY

Table of Contents

Related product manuals