EasyManua.ls Logo

Triple E COMMANDER Series - SMOKE ALARM

Default Icon
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6-6
6.3.3 SMOKE ALARM
This alarm is located in the coach and sounds when-
ever there is smoke in the unit. Always use the
exhaust fan, over the stove when cooking. Smoke
from cooking may trigger the alarm.
a. If alarm sounds, check for the presence of
a re. If re is suspected, leave the vehicle
immediately.
b. Open doors, vents and windows to air out
vehicle and silence alarm. Correct and
eliminate smoke source.
c. Check alarm on a regular basis. Check
when removing from storage, before trips
and weekly thereafter. Depress center
button to test alarm electronics. Test alarm
sensor by blowing smoke (from safe, re-
free source) past sensor. If alarm does not
sound when testing, determine source of
problem and correct or replace alarm.
Fig. 6-5 SMOKE ALARM
d. Do not remove battery to silence alarm.
When alarm beeps” every minute, battery
is weak and must be replaced. Do not allow
battery to go dead. Be sure to replace with
recommended battery. Test after battery is
replaced.
e. Clean and vacuum opening on smoke alarm
once a month.
f. Do not try to repair alarm. Replace it.
g. Smoke alarms are not perfect and do not
respond in all situations. The best safe-guard
is re prevention.
COMMANDER / EMBASSY
6-6
6.3.3 SMOKE ALARM
This alarm is located in the coach and sounds when-
ever there is smoke in the unit. Always use the
exhaust fan, over the stove when cooking. Smoke
from cooking may trigger the alarm.
a. If alarm sounds, check for the presence of
a re. If re is suspected, leave the vehicle
immediately.
b. Open doors, vents and windows to air out
vehicle and silence alarm. Correct and
eliminate smoke source.
c. Check alarm on a regular basis. Check
when removing from storage, before trips
and weekly thereafter. Depress center
button to test alarm electronics. Test alarm
sensor by blowing smoke (from safe, re-
free source) past sensor. If alarm does not
sound when testing, determine source of
problem and correct or replace alarm.
Fig. 6-5 SMOKE ALARM
d. Do not remove battery to silence alarm.
When alarm beeps every minute, battery
is weak and must be replaced. Do not allow
battery to go dead. Be sure to replace with
recommended battery. Test after battery is
replaced.
e. Clean and vacuum opening on smoke alarm
once a month.
f. Do not try to repair alarm. Replace it.
g. Smoke alarms are not perfect and do not
respond in all situations. The best safe-guard
is re prevention.
COMMANDER / EMBASSY

Table of Contents

Related product manuals