Trolex Sentro 8 - Default Chapter; Table of Contents

TX9165 User Manual
TX9165-UM-EN-07 3
TX9165 Sentro 8 Sensorstation
Contents
1. Product Overview 5
1.1 Operating Features 5
1.2 Application 6
1.3 Product Options 7
1.4 Dimensions 8
1.4.1 TX9165 Sentro 8 Sensorstation
- Four Gas Ports 8
1.4.2 TX9165 Sentro 8 Sensorstation
- Eight Gas Ports 9
1.5 Technical Information 10
1.6 Electrical Details 12
1.7 Sentro Sensing Modules 13
1.7.1 Sentro eModules 14
1.7.2 Sentro rModules Remote
Sensing 19
2. Certification 20
3. Installing 24
3.1 Safety Precautions 24
3.2 Siting Recommendations 26
3.3 Connections 27
3.4 Connecting in Mining and
Tunnelling Areas 34
3.5 Sentro 8 Sensorstation
Sensing Module Positions 35
3.6 Datacomms 36
4. Setup and Calibration 37
4.1 Controls and Indicators 37
4.1.1 Navigation 39
4.2 Start-up Screen 40
4.2.1 Base Screens 40
4.2.2 Sensor Inputs Overview 42
4.2.3 Relay Outputs Overview 47
4.2.4 Audio/Visual Alarms
Overview 47
4.3 Main Setup Menu 48
4.3.1 Security 48
4.3.2 Display 49
4.3.3 Time and Date 51
4.3.4 Log 52
4.3.5 Datacomms Protocol 54
4.3.6 Reset Exposure 56
4.4 Sentro eModule Setup 58
4.4.1 Sentro eModules Calibrate 59
4.4.2 Setpoint 1 and Setpoint 2 63
4.4.3 Assign Fault 66
4.4.4 Assign Exposure Alarm 67
4.4.5 Status 68
4.5 Sentro rModule Setup 69
4.5.1 Scaling 70
4.5.2 Setpoint 1 and Setpoint 2 72
4.5.3 Assign Fault 74
4.5.4 Status 75
4.5.5 Calibrate PT100 76
4.5.6 Setup of an On/Off Input
rModule 76
4.5.7 Setup of an On/Off Diode
Input rModule 76
4.6 Output Relays Setup 78
www.trolex.com