TX9165 User Manual
TX9165-UM-EN-07 19
1.7.2 Sentro rModule Remote Sensing
Sentro rModules function in the same way as eModules and
incorporate screw terminals to accept direct input connections
of cables from remote analogue or digital sensors. A sensor
power supply source is also provided at the rModule terminals
where appropriate.
All eight positions (A to H) in the Sentro 8 Sensorstation
can be fitted with rModules in positions where no eModules are being used.
TX9160.301
4 to 20 mA
Industrial standard analogue sensor
input; 2 and 3 wire options
TX9160.303
0.4 to 2 V
Voltage input signals, analogue
sensor input; 2 and 3 wire
connections
TX9160.306
PT100
Standard PT100 temperature
monitoring with line compensation
TX9160.501
ON/OFF
NAMUR proximity switch with
line-fault monitoring or conventional
contacts; pressure switches, limit
switches, etc
TX9160.502
ON/OFF & Diode
ON/OFF inputs from contacts with
series diode for open circuit and
short circuit line fault monitoring
www.trolex.com
To Next Page
Loading...