TX9165 User Manual
TX9165-UM-EN-07 81
5. Audio/Visual Alarm
References
All alarm signals and fault signals can be
assigned to operate the inbuilt audio visual
alarm in any combination.
Alarms are generated from:
• From Setpoint 1 (SP1) (General alarm)
on sensing modules A to H
• From Setpoint 2 (SP2) (High alarm)
on sensing modules A to H
• From a Fault on sensing modules A to H
• Relays 1 to 4 fault monitoring
5.1 Alarm Severity Selection
General Alarm
Slow repeating pulse
Warning Alarm
Faster, double
repeating pulse
Critical Alarm
Faster, insistent pulse
Confidence Alert
To indicate that
the Sentro 8
Sensorstation is On
and functioning
Checkpoint
To view an Alarm Event and mute the
Audible Alarm, enter the Mono View
to view detailed information about the
Alarm Event. This action will also mute the
audible alarm.
www.trolex.com
To Next Page
Loading...