54 TX9165-UM-EN-07
4.3.5 Datacomms Protocol
The protocol characteristics required for the
Modbus datacomms can be setup where the
Sentro 8 Sensorstation is being integrated
into a wider communication network or to
interface with a PC or SCADA system.
Data Protocol Modbus
Format Binary
Databits 8
Stopbits 1
Parity None
Data rate
300/600/1200/2400/4800/9600/
14400/19200/28800/38400/
57600/115200
Address 1 to 99
TX On 0 to 99 ms
TX Off 0 to 99 ms
Duplex Half
To Access the Datacomms Setup Menu
From the Main Setup Menu, use the
navigation keypad, scroll to Datacomms and
select OK.
www.trolex.com
To Next Page
Loading...