92 TX9165-UM-EN-07
7.6 Record Keeping
Institute a regular calibration and
maintenance procedure and keep a record.
Please contact our Product Support
Department at service@trolex.com or
your local Trolex service agent, for help in
installing proper maintenance procedures.
The ‘Maintenance and Calibration Log’ gives
an example of a typical record system.
There are also sensing module user
accessible locations, via Modbus, which
can be used to store recent calibration
information.
7.7 Protection Grid
Periodically check the condition of the
stainless steel protection grid and sealing
ring on the front cover of the instrument.
Clean excessive dust accumulations with a
small brush or light air steam.
7.8 Servicing and Repair
Some versions are certified to Ex standards
and must be serviced and repaired by
Trolex Ltd or your local Trolex service agent
approved by Trolex Ltd in order to preserve
the Ex integrity.
Substitution of components and any
additions or changes to the product will
invalidate the product warranty and may
contravene the terms of the intrinsically safe
certificate.
www.trolex.com
To Next Page
Loading...