Trolex Sentro 8 - Reset Exposure

56 TX9165-UM-EN-07
Use the navigation keypad, scroll up or
down on the first digit to the required TX
On number, scroll right to the second digit.
Repeat the above for the second digit in TX
On and select OK.
Use the navigation keypad, scroll to Set or
Quit and select OK.
To Change the TX Off Setting
From the Datacomms Setup Menu, use the
navigation keypad, scroll to TX Off and select
OK.
Use the navigation keypad, scroll up or
down on the first digit to the required TX
Off number, scroll right to the second digit.
Repeat the above for the second digit in TX
Off and select OK.
Use the navigation keypad, scroll to Set or
Quit and select OK.
4.3.6 Reset Exposure
Checkpoint
STEL and TWA that has accumulated in
any toxic gas Sentro eModules will be
simultaneously reset to zero.
Checkpoint
The accumulated STEL and TWA levels
should only be reset by authorised
personnel.
www.trolex.com