TX9165 User Manual
TX9165-UM-EN-07 65
Assign Setpoint
The Setpoint 1 or Setpoint 2 On alarm
state can be assigned to the following:
• Relay 1 output
• Relay 2 output
• Relay 3 output
• Relay 4 output
• The on-board audio/visual alarm
The Assign To of Setpoint 1 and Setpoint 2
can be setup to preference.
From the Setpoint 1 or Setpoint 2 Setup
Menu, use the navigation keypad, scroll to
Assign To and select OK.
The screen prompts are as follows:
• Cursor
• Power-up the selected relay
• Reset a latched relay
• Audio alarm severity
www.trolex.com
To Next Page
Loading...