Speedy 360
BA 8032_2.2_EN (05/2016) 39 / 90
For second operating level. Press the button together with any of
the following keys to activate the following functions:
Shift + Z position working
table
Laser head moves quickly to
corresponding end position
LED interior illumination on/off
Work table moves up to autofocus
position
Work table moves to the lowest
position
Deactivated temporary home
position
Press the button to switch the exhaust on or off.
LED ON: Exhaust activated
LED OFF: Exhaust deactivated
After completing the engraving process, the exhaust system can be
switched off only after a few seconds more (follow-up time).
To Next Page
Loading...
Need help?
General
