Troxler RoadReader 3430 User Manual

8–12
A
A
u
u
t
t
o
o
-
-
S
S
t
t
o
o
r
r
e
e
The Auto-Store function automatically stores sample data upon
completion of a measurement. The data is stored under the
active project, using a sequential sample ID number. When a
new project is created, the sample ID number for the Auto-Store
function starts at 1 and is incremented each time a new
measurement is stored automatically or manually.
To access the Auto-Store function, press ¢8² at the Projects menu
shown on page 8–2. The gauge displays:
Auto-Storage
1. ON
2. OFF
Press # to Select
f To return to the Projects menu without changing the Auto-
Store status, press ¢ESC².
f To turn the Auto-Store function on, press ¢1².
f To turn the Auto-Store function off, press ¢2². The gauge
updates the Auto-Store status, displays a brief confirmation
message, and returns to the Projects menu.
Active Project Selected
If you attempt to enable the Auto-Store function and a project
has been selected as active, the gauge enables the Auto-Store
function, briefly displays the confirmation message shown
below, and then returns to the Projects menu.
Auto-Storage
Is Now ON
Prj: XXX
Next Sample # X

Troxler RoadReader 3430 Specifications

General

Brand	Troxler
Model	RoadReader 3430
Category	Measuring Instruments
Language	English