3–10
Extended Menu
The gauge is shipped with the current date and time (Eastern
Standard Time) stored in its memory. In addition, the gauge can
store a user ID and customer name. These settings are accessed
from the Extended menu.
This menu includes functions that are intended for use by
authorized personnel only, and requires the use of the access
code shown at the front of this book.
To access the Extended menu, press ¢.² ¢9² at the Setup menu.
The gauge requests an access code:
Input Access Code
_
Press <ENTER>
After entering the access code (see page xiv), the gauge displays
the Extended menu.
After setting the date and time, user ID, and/or customer name
as described in the following sections, press ¢ESC² to return to
the Setup menu.
For information on all of the functions available from the
Extended menu, refer to Chapter 9: Extended Menu.
Clock/Calendar
The Clock/Calendar function allows the operator to change the
date and time, and to select the display format for each. To
access the Clock/Calendar menu, press ¢1² at the Extended menu.
The gauge displays:
- Clock/Calendar ↨
1. Change Time
2. Change Date
3. Time Format
To Next Page
Loading...
Need help?
General
