Model 3440 8–13
No Project Data
If you attempt to enable the Auto-Store function but no project
has been created, the gauge displays:
No Project Data
Do You Want To
Enable Auto-Store by
Creating a Project?
f To return to the Projects menu without enabling the Auto-
Store function, press ¢NO².
f To create a project and enable the Auto-Store function, press
¢YES². The gauge displays the screens required to create a
project as described on page 8–5. When the project name is
complete, the gauge sets the project as active, displays the
confirmation message shown on page 8–12, and returns to
the Projects menu.
No Project Selected
If the operator attempts to enable the Auto-Store function and
one or more projects have been created, but no project has been
selected as active, the gauge displays:
Auto-Store Requires
An Active Project:
1. Select Project
2. Create Project
To select an existing project, press ¢1². The gauge displays the
screens required to select a project as described on page 8–3.
After the project is selected, the gauge sets the project as active,
briefly displays the confirmation shown on page 8–12, and
returns to the Projects menu.
To create a new project, press ¢2². The gauge displays the
screens required to create a. After the project is created, the
gauge sets the project as active, briefly displays a confirmation
message, and returns to the Projects menu.
To Next Page
Loading...
Need help?
General
