9–4
The language feature is an optional upgrade (see page 5–16). If
your gauge is enabled with this option, you can access the
language function by pressing ¢3² at the Extended menu. The
gauge displays:
-Language- ↨
1. English
2. Espanole
3. Deutsch
-Language- ↨
4. Francaise
Use the up and down arrows to scroll between the menu
options. To select the desired language, press the corresponding
number key. To return to the Extended menu, press the
¢ENTER/START² or ¢ESC² key.
The strength of radioactive material is measured by its activity,
or rate of decay. This activity decreases with time. The length of
time it takes a given amount of radioactive material to decay to
half of its original strength is referred to as the half-life. The
half-life of the Am-241:Be source is 432 years. The half-life of
the Cs-137 source is 30 years.
The Source Decay function allows the operator to view how the
decrease in the radiation intensity of the source affects gauge
density measurements. It displays the actual density standard
count, the predicted standard count, and the percent difference
between the two sets of counts. The gauge calculates the
predicted standard count based upon the density standard