Troxler RoadReader 3430 - Setting the Density Offset

7–4
D
D
e
e
n
n
s
s
i
i
t
t
y
y
O
O
f
f
f
f
s
s
e
e
t
t
To access the Density Offset functions, press ¢1² at the Offset
menu.
DENSITY OFFSET
#.# pcf
1. Enable 2. Disable
3. Change Offset
The gauge displays the current density offset on the second line.
f To enable the displayed density offset, press ¢1². The gauge
enables the offset, displays a brief confirmation message,
and returns to the Ready screen.
f To disable the density offset, press ¢2². The gauge disables
the offset, displays a brief confirmation message, and
returns to the Ready screen.
NOTE
The density offset is also disabled when the gauge is
turned off.
f To enter a new density offset, press ¢3². The gauge prompts
for the density offset as shown:
DENSITY OFFSET
#.# pcf
Select (+/-)
Input and <ENTER>
To change the offset, select the offset sign (positive or negative),
enter the density offset, and press ¢ENTER/START². The gauge
enables the new density offset and returns to the Ready screen.