Troxler RoadReader 3430 User Manual

8–14
M
M
a
a
n
n
u
u
a
a
l
l
S
S
t
t
o
o
r
r
e
e
After completing a measurement and before taking another one,
sample data can be stored manually under the active project.
Refer to pages 8–3 through 8–5 for instructions on creating and
selecting the active project.
To manually store measurement data, press the ¢STORE² key
while data is being displayed. If no project is active when the
¢STORE² key is pressed, the gauge displays the error message
No active project!, then returns to the Ready screen.
NOTE
The ¢STORE² key is active only when measurement
data is displayed. Measurement data is displayed at
the end of a reading, or the most recent test results
can be displayed using the ¢RECALL² key (see page 4–
31).
For each measurement, the gauge can store a location
description of up to 12 characters, as well as a note of up to 15
characters. For an Asphalt mode measurement, the gauge can
also store the location with respect to the centerline (left, right,
or neither), and the distance from the centerline. Follow the
prompts to enter location information and/or a note.

Troxler RoadReader 3430 Specifications

General

Brand	Troxler
Model	RoadReader 3430
Category	Measuring Instruments
Language	English