8–2
The gauge can store approximately 750 readings. The Project
and Store functions allow handling of measurement data.
Measurement results are stored in files (memory locations)
called projects, which are named by the operator.
Projects are managed using the Projects menu. From this menu,
the operator can select a project (make an existing project active
so that additional data may be added to it), view project data,
create a new project, erase projects, output project data to the
selected destination (via the serial or USB port), deactivate a
project, and enable the Auto-Store function.
To access the Projects menu, press ¢PROJ². The gauge displays:
-Projects- ↨
1. Select
2. View
3. Create
-Projects- ↨
4. Erase
5. Output Project
6. Set Output Dest.
-Projects- ↨
7. Deactivate
8. Auto-Store
NOTE
The ¢PROJ² key is active only when the
Ready
screen
is displayed.
Use the arrow keys to scroll through the menu options. Use the
numeric keys to select a menu option. Press ¢ESC² to return to
the Ready screen.
To Next Page
Loading...
Need help?
General
