8–8
At the Projects menu, press ¢5². The gauge request the output
format as shown:
Output:
1. 32 Column Report
2. Spreadsheet
Press # to Select
The 32 Column Report option is formatted for a standard printer
width. This format is recommended when outputting the data to
a printer. The Spreadsheet option is sent in a comma-delimited
format, which can then be imported easily into a spreadsheet
program, such as Microsoft Excel
. Table 2 on page 8–10 defines
the information contained in each column of the spreadsheet.
Press ¢1² or ¢2² to select the desired output format. The gauge
displays:
Output:
1. One Project
2. All Projects
Press # to Select
From this menu, the gauge can print (or upload) either a single
project or all projects.
f To output a single project, press ¢1². The gauge displays:
Prj: XXXXXX ↨
Arrows for Scroll
<ENTER> to Select
Use the arrow keys to scroll through the project names
displayed on the first line. When the gauge displays the
desired project, press ¢ENTER/START².
f To output the data from all projects, press ¢2².
To Next Page
Loading...
Need help?
General
