4 SPECIFICATIONS AND INSTALLATION
Oven Restraint Kit
Part Number: TC3-0242
WARNING: The Oven Restraint Kit will
not prevent the oven from falling off a
countertop if the oven is pulled off or
allowed to slide off the edge. Installation
instructions are included with the kit.
ChefComm Pro®
ChefComm Limited™
Part Number: CON-7016
ChefComm Limited
TM
is a “read-and-upload only”
version of ChefComm Pro® that helps ensure menu
settings are easy to distribute, while preventing
them from being changed at the store level.
Oven Connect™
Oven Connect
TM
allows you to update menu
settings for multiple ovens at once, from one
central location via LAN. Oven Connect
TM
can also
download oven diagnostics and counters from the
oven to your computer. For more information
on how to network ovens, see page 14. For
information on Oven Connect, contact
TurboChef Customer Support at 800.90TURBO
or +1 214.379.6000.
Voltage Selection
For North America oven models, the oven will
detect 208 or 240 incoming voltage.
If incoming voltage for the store is different than
the factory-preset voltage, the operator will be
required to select either 208 or 240 after pressing
the On/Off key to turn on the oven. The correct
voltage will be enlarged on the screen, identifying
which option to select (see below).
Ventilation
The TurboChef Encore/Encore 2 oven has been
approved by Underwriter’s Laboratory® for ventless
operation (UL 710B, KNLZ listing) for all food
items except for foods classified as “fatty raw
proteins.” Such foods include bone-in, skin-on
chicken, raw hamburger meat, raw bacon, raw
sausage, steaks, etc. If cooking these types of foods,
consult local HVAC codes and authorities to ensure
compliance with ventilation requirements.
NOTE: In no event shall the manufacturer assume
any liability for damages or injuries resulting from
installations which are not in compliance with the
instructions and codes previously listed.
Part Number: CON-7006
ChefComm Pro® lets you easily create menu
settings on a computer and upload them to
an oven via smart card or USB. For more
information, call TurboChef Customer Support
at 800.90TURBO or +1 214.379.6000.
Figure 3: Select Voltage
To Next Page
Loading...
