15
INFO MODE
To set the auto-on or auto-off time (Figure 9,
page 14),
1. Ensure the time of day is entered accurately.
2. Press the top-right soft key to toggle between
temperatures 1 and 2. If two different
temperatures are used for cooking, they must
be set to different auto-on and auto-off times.
3. Use the keys to the left and right of the “auto
on time” field or “auto off time” field to move
the cursor between digits.
4. Use the number keys to enter the hour and min-
ute for the oven to automatically turn on or off.
5. Select “Save” to save your changes or press the
Back/Stop key to cancel.
Load Menu from USB or Smart Card
NOTE: To update the oven menu, you may need
to verify that access to the Load Menu screen is
turned on. See page 14, section “Load Menu ON/
OFF” for details.
NOTE: Loading a menu from or saving a menu to
USB will take a few seconds longer than smart card.
To load a menu to the oven,
1. From the Info 2 screen (Figure 6, page 13),
select “Load Menu.”
2. Insert the USB device or smart card
(Figure 10).
3. Load the menu (Figure 11):
a. For USB, select “Load from USB.”
b. For smart card, select “Load from Card.”
4. Verify the oven beeps and reads FINISHED.
Save Menu to USB or Smart Card
NOTE: To save a copy of the oven menu, you may
need to verify that access to the Load Menu screen
is turned on. See page 14, section “Load Menu ON/
OFF” for details.
To save a copy of the menu to a smart card,
1. From the Info 2 screen (Figure 6, page 13,
select “Load Menu.”
2. Insert the USB device or smart card (Figure 10).
3. Save the menu (Figure 12):
a. For USB, select “Save to USB.”
b. For smart card, select “Save to Card.”
4. Verify the oven beeps and reads FINISHED.
Sound Volume
From the Info 2 screen (Figure 6, page 13), select
“Sound” to increase or decrease the oven sound
volume.
Electrical Temperature
From the Info 2 screen (Figure 6, page 13 ),
view the current temperature of the control board.
Reset the Oven
Resetting the oven is one way to clear an error
message, should one occur. To reset the oven:
1. Return the oven to the cooling down or off
screen. (Press the Back key if necessary.)
2. Hold the “i” key for 5 seconds.
Figure 10: Smart Card / USB Slot Location
Figure 11: Load Menu Screen: Load Menu Options
Figure 12: Load Menu Screen: Save Menu Options
To Next Page
Loading...
Need help?
General
