Tuttnauer 3840 - Page 88

Page 86 of 110 Pages
Repeat the action mentioned in "Dry Time" above.
Add Dry time
See 6.2.1. Add extra Dry Time.
13.4.9 Ending
End Temperature
Choose and enter End Temperature
SET PARAMETER screen will be displayed
Set the required value, move to Set and press UP or
DOWN keys to confirm the parameter value.
In order to exit move the cursor to Exit and press UP
or DOWN keys
13.4.10 Global
Bio Hazard (Option)
Choose and enter Bio Hazard.
SET PARAMETER screen will be displayed
Set the required value, move to Set and press UP or
DOWN keys to confirm the parameter value.
In order to exit move the cursor to Exit and press UP
or DOWN keys
Typical display for End Temperature subdirectory
Typical display for Bio Hazard subdirectory