Tuttnauer 3840 - Page 87

Page 85 of 110 Pages
Choose and enter Exhaust Mode
SET PARAMETER screen will be displayed
Set the required value, move to Set and press UP or
DOWN keys to confirm the parameter value.
In order to exit move the cursor to Exit and press UP
or DOWN keys
13.4.8 Drying
Dry Time
Choose and enter Dry Time
SET PARAMETER screen will be displayed
Set the required value, move to Set and press UP or
DOWN keys to confirm the parameter value.
In order to exit move the cursor to Exit and press UP
or DOWN keys
Dry Air On Pressure
Repeat the action mentioned in "Dry Time" above.
Dry Air Off Pressure
Typical display for Exhaust Mode subdirectory
Typical display for Dry Time subdirectory