F3200 Operator's Manual Document No: LT0119
System Specifications
Page 3-4 29 July 2002 Issue 2.04
3.1.4 DISPLAYS
Standard Operator Display
Includes : LCD; FFCIF LEDs; System Status LEDs
Panel Size : 19", 4U
FFCIF Type : 3 (common indicators & common controls)
Standard : Complies with AS4050 (int) - 1992
LCD Size : 2 Lines of 40 characters
5.5mm (H) x 3.2mm (W) per character
Site Name : 40 Characters max.
Zone Name : 30 Characters max.
Relay Name : 30 Characters max.
FFCIF LEDs : ALARM (red); ISOLATED (yellow); FAULT (yellow)
System
Status LEDs : MAINS ON (green); CHGR/BATT FAULT (yellow); SYSTEM
FAULT (yellow); ANCILLARY ISOLATED (yellow); BELLS
ISOLATED (yellow)
Internal : Mains On (green), Fuse Blown (yellow) on MAF/PSU pcb.
Status LEDs
Optional Additional LED Display
Requires 1 x ME0060 plus 1 x FZ3031 plus 1-3 x FP0475 as required.
ME0060, MECH ASSY, 1901-79, F4000 RAC, EXT INNER DOOR
(19", 7U, mounts up to 4 of 16 LED Display Bd)
FZ3031 KIT, F3200, 16 ZONE LED DISPLAY, LHS POSITION
FP0475, FP, F4000 DISPLAY EXTENDER KIT, 1901-26
Includes : 1 x 16 LED Display Bd (16 zone parallel LED display); FRC;
Power leads; zone name label.
Format : 7U Parallel LED display mounts directly below the standard 4U
LCD.
The LCD and common LEDs operate as per standard. Zone
status is additionally shown on the zone LEDs.
FFCIF Type : 2 (individual zone indicators and common controls)
Zone LEDs : ALARM (red); FAULT (yellow); ISOLATED (yellow)
Name Space : 10mm x 60mm per zone on paper label.
E.g. 2 lines of 23 characters at 10 per inch.
NDU New Zealand Mode Display Extender Board
Status LEDs: NORMAL (green), DEFECT (yellow), FIRE (red)
3.1.5 ENVIRONMENTAL
Operating Temperature : -5°C to 45°C (Ambient)
Relative Humidity : 95% maximum @ 40°C (non-condensing)
To Next Page
Loading...
