Tyco Electronics Galaxy SC Controller J85501F-1
Issue 13 February 2001 Configuration 4 - 63
modem port. The Hardware switch associated with this feature is
SW203-3 on the BJH pack.
Remote Rect On: Sets the software switches for permission to remotely
turn individual rectifiers On that are being held in Standby by the
controller. The Hardware switch associated with this feature is
SW203-7 on the BJH pack.
Remote Rect Off: Sets the software switches for permission to
remotely place individual rectifiers into Standby. The Hardware switch
associated with this feature is SW203-7 on the BJH pack.
System Software Configure → System → Software Config. The following system
parameters are configured here.
Equipment Description: Configurable System Description.
Software Version: Read Only display showing the software versions of
the BJB and BJH packs installed in your controller.
Site Desc: Site Description (name of the site) that is displayed on the
Main EasyView Screen.
Site ID: Site ID that is sent as the identifier for site that is sent with the
Call-Out Feature.
Date Format: Selects several options for displaying the date, month,
day or year first.
Time Format: Select from 12 or 24 hour clock.
Daylight Savings: Enables or Disables automatic time adjustment for
daylight savings time.
Temp Units: Select all temperature displays to be shown in degree F°
or C°.
Frnt Pnl Lang: Select from English, Symbolic (abbreviated English) or
Other (Spanish)
Ambient Temp: Allows a optional link to a RPM temperature channel
for ambient power room temperature.
System Time Configure → System → System Time. Sets controller date and time.
To Next Page
Loading...
