Tyco Galaxy SC Controller - Page 181

Tyco Electronics Galaxy SC Controller J85501F-1
Issue 13 February 2001 Operation 6 - 7
Move the cursor to the field that denotes the statistics to be viewed and
press the <ENTER> key to display data. If there is more than one screen
of data (eight lines of text), use the UP, DOWN arrow key to display
additional screens.
The PLANT LOAD field displays the plant load statistics.
The PLANT VOLT field displays the plant voltage statistics.
The PLANT UBT field displays the plant Universal Temperature Probe
reading statistics.
The PLANT TRD field displays the plant total rectifier drain statistics.
The PL BD field displays the plant Battery Discharge statistics.
The BUSY HR field displays the system Busy Hour statistics.
The DERV CHAN field displays statistics for any derived channels that
have been configured in the system.
The TREND field displays the system Trend statistics.
The RECT.. field is the sub menu to display the rectifier statistics.
The RPM.. field is a sub menu to display the Remote Peripheral Monitor
channel statistics that may be in the system.
The CONV.. field is the sub menu to display the converter statistics.
The BIC.. field is a sub menu to display the Bay Interface Card channel
statistics that may be in the system.
Viewing
Maintenance
Reminders
Maintenance Reminders may be configured in the system to provide a
warning that it is time to perform some regularly schedule maintenance
activity. To access these Maintenance Reminders, press the <MENU>
key to bring up the MAIN menu; move the cursor to the HIS/STATIS
field, press <ENTER> to get to the HISTORY/STATISTICS menu;
move the cursor to the VIEW MRM field, and press <ENTER> to bring
up the listing of Maintenance Reminders.
Viewing the
Notepad
To access messages left on the User and Super-User Notepads, press the
<MENU> key to bring up the MAIN menu; move the cursor to the HIS/
STATIS field; press <ENTER> to get to the HISTORY/STATISTICS