Tyco Galaxy SC Controller User Manual

Tyco Electronics Galaxy SC Controller J85501F-1
Issue 13 February 2001 T1.317 Interface Appendix A - 11
error occurred while processing the command then a line preceded by
the ! (exclamation) character will give an error code and short
description of the error.
ALA Report active alarms
Syntax:ALA [objpath]
This command searches the objects that objpath leads to, and all objects
linked to these objects, for active alarms. If objpath is omitted, all active alarms
are reported. Each line in the report has the following format:
event_path,date,time,severity,description
The following examples will report all the active alarms in the system and just
the DC plant active alarms:
ALA
ALA DC1
ALI Report aliases
Syntax: ALI
ALI alias<,alias>*
If alias is omitted, all aliases in the system are reported. The system defined
aliases are reported first followed by the user defined aliases. The system de-
fined aliases are reported with the alias name in uppercase. The user defined
aliases are reported with the alias name in lowercase. If alias is included in the
command line, only the aliases that appear in the command will be reported.
Each alias is reported using the following format:
alias=command_line
ATT Report the object attributes
Syntax:ATT objpath
This command reports just the attribute mnemonics of objects that objpath
leads to. Attributes are reported one per line. For example, ATT DC1 will list all
the attributes mnemonics of the DC1 object.
CON Report the settings of configuration and operation attributes
Syntax:CON objpath
This command reports the values of attributes that can be changed by the CHA
command or the OPE command. It is useful for limiting a report to only those
attributes that are settable.
DIA Report diagnostic information
Syntax:DIA [objpath]
This command reports diagnostic information for the entire system or just the
objects that objpath leads to. This command is useful for additional information
on active alarms or warnings in the system. The following example will retrieve
all diagnostics information and just the DC plant diagnostics information:
DIA
DIA DC1
HELP Report the customer service 800 number
Syntax: HELP
This command returns: 1-800-THE-1PWR.
HIS Report event history information
Syntax: HIS objpath<,hisoption=value>*
HIS [hisoption=value<,hisoption=value>*]
where hisoption and value are defined as follows:
hisoption value
g for group 0:no 1:yes (default:0)

Tyco Galaxy SC Controller Specifications

General

Model	Galaxy SC
Power Supply/Operating voltage	12V DC
Inputs	8
Outputs	4
Type	Controller
Communication Interface	RS485

Summary

1 Introduction

The Product

Describes the Tyco Electronics Galaxy SC Controller, J85501F-1.

Customer Service Contacts

Provides contact information for customer service, training, and technical support.

2 Product Description

Overview

Introduces the Galaxy SC Controller's role in monitoring and controlling telecommunications power equipment.

Basic Controller

Explains the basic local control and monitoring functions of the battery plant.

Intelligent Controller

Details advanced control and monitoring features added by the intelligent controller option.

3 Installation

Overview

Outlines the installation process for new plants or replacing existing controllers.

Precautions

Lists safety precautions to consider before performing installation procedures.

New Plant Installation

Instructions for installing a Galaxy SC shipped directly from the factory in a new Battery Plant.

4 Configuration

Introduction

Outlines the initial plant power-up and required controller configuration.

Methods of Configuring Galaxy

Covers configuration via front panel, remote terminal (T1.317), and EasyView software.

Basic Controller Configuration From the Front Panel

Explains how to configure plant attributes using the front panel interface.

5 Acceptance Testing

Introduction

Explains testing procedures to simulate alarm conditions and verify controller functions.

Tools and Test Equipment

Lists the necessary tools for performing acceptance tests.

Precautions

Lists safety steps to follow when testing plant alarms.

6 Operation

Introduction

Details operating the Galaxy SC Controller from front panel, EasyView, or T1.317.

Basic Controller’s Front Panel Operation

Depicts front panel displays and operational paths.

Alarm Cut Off

Explains how to perform ACO operation to temporarily disable audible alarms.

7 Feature Descriptions

AC Distribution

Supports monitoring of AC distribution parameters via T1.317 or front panel.

Alarm Cut-Off (ACO)

Provides means for temporarily disabling audible alarm contacts.

Alarm Test

Provides means to sequentially assert user selected contact relays for testing.

8 Troubleshooting

Introduction

Describes troubleshooting procedures requiring circuit pack removal/replacement.

Basic Controller Circuit Packs

Discusses troubleshooting for BJB Microprocessor Board and other basic boards.

Intelligent Controller Circuit Packs

Discusses troubleshooting for BJH Microprocessor Board and BJJ Power Board.

9 Safety

Safety Statements

Read and follow all safety instructions and warnings before installation, maintenance, or repair.

Warning Statements and Safety Symbols

Explains symbols and statements for hazardous conditions.

Precautions

Lists precautions for working on or using this type of equipment.

10 Product Warranty

A. Seller warrants to Customer only, that:

Seller warrants products will be free from defects and conform to specifications.

B. The Warranty Period listed below is applicable to Seller’s Manufactured Products

Lists warranty periods for new and repaired products.

Appendix A T1.317 Interface

Overview

Describes T1.317 as the primary source of access to Galaxy SC Controller features.

Login

Explains how a user can login to the T1.317 interface.

Objects and Attributes

Explains T1.317 standard organizes system into objects and attributes.

Appendix B T1.317 Objects and Attributes

Table B-1: System Objects and Attributes

Lists system objects and their attributes.

Table B-2: DC Distribution Objects and Attributes

Lists DC distribution objects and their attributes.

Table B-3: AC Distribution Objects and Attributes

Lists AC distribution objects and their attributes.

Appendix C T1.317 Error Messages

Error Messages and Causes

Lists T1.317 interface error messages and their possible causes.

Syntax Related

Lists specific command syntax errors.

Security Related

Lists error messages related to security.

Appendix D TL1 (Transaction Language 1) and X.25 Interface

Introduction

Describes TL1 command interface for Galaxy SC Controller.

Equipment Setup and Installation

Describes wiring and configuring Galaxy SC for TL1.

Galaxy Unit Setup

Enables TL1 function by setting BJH DIP switch.

Appendix E Terminal Menu Interface

Login

User enters text-based terminal menu interface by logging into T1.317.

Menus

Lists available menus for checking system status, history, and statistics.

Appendix F Spare Parts

Table F-1: Spare Parts

Lists spare parts available for Galaxy SC Controller Model J85501F-1.

Appendix G Glossary

Alarm Severity

Defines severity levels for alarms: critical, major, minor, warning, record only.

Critical Alarms

Indicates severe, service-affecting conditions requiring immediate action.

Major Alarms

Indicates serious disruption of service or failure of important circuits.