Tyco Galaxy SC Controller User Manual

Tyco Electronics Galaxy SC Controller J85501F-1
Appendix A - 12 T1.317 Interface Issue 13 February 2001
n for newest datedate (default: current date)
o for oldest datedate (default: oldest system date)
f for report first “o”:oldest first “n”:newest first (default n)
i for include “comma separated list of events”
This command searches the objects that objpath leads to, and all objects
linked to these objects, for events and reports any history for those events. If
objpath is omitted, history on all events in the system is reported. By default
history reports are ordered most resent event first. The history options can be
used to change the order of the report, group similar events, limit the span of
dates reported, or to limit the events included in the report. Each line of the his-
tory has the following format:
event_path,date,time,severity,description
The following example reports DC1 plant alarm history and just RFA1 history:
HIS DC1
HIS DC1 RFA
HIS Report special history information
Syntax:HIS objpath,attrid
This form of the history command is used to report special types of history. The
special histories include rectifier state history, battery on discharge history,
boost history, and login history. The following examples show how this is done:
HIS REC,STTReport rectifier state history
HIS DC1,BODReport battery on discharge history
HIS MDM,STTReport modem login history
HIS LPT,STTReport local port login history
HIS AUX,STTReport auxiliary port login history
LIN Report object links
Syntax:LIN objpath
This command is useful for reporting the children of an object. If objpath leads
to an object all the linkable attributes of that object will be reported with the ob-
jects that are linked to them. If objpath leads to a linkable attribute then the ob-
jects linked to that attribute will be reported. The report will include the object
identifier preceded by a colon followed by a line for each linkable attribute in
the following format: attrid=objid list. For example, LIS PS1 will report all of the
links to the power system object.
LIS List all object types
Syntax:LIS
All object types are reported one per line using the following format: obj-
type,description.
LIS List all objects of the given type
Syntax:LIS objtype
Objects of the given type are reported one per line using the following format:
objid,description. For example, LIS DTA will list all of the dual threshold alarms
in the system.
LIS List the type of an object
Syntax:LIS objid
The type of the given object is reported using the following format: objtype,de-
scription. For example, LIS BDA1 will report that the batter on discharge alarm,
BDA1, is a dual threshold alarm.
MET Report the value of measurement attributes
Syntax:MET objpath<,<attrid | attrl>>*
This command is useful for reporting the values of measurement attributes of
objects that objpath leads to. Examples of measurement attributes are plant
voltage and plant current. The object tables in the appendix indicate which at-
tribute are measurements. In addition, linkable attributes linked to remote pe-
ripheral monitor channels are considered measurement attributes. If attributes
are specified in the command line, those attributes must be measurement at-

Tyco Galaxy SC Controller Specifications

General

Brand	Tyco
Model	Galaxy SC Controller
Category	Controller
Language	English