Unify CP200 - Page 129

administration.fm
A31003-C1000-M101-1-76A9, 03/2016
OpenScape Desk Phone CP200/400/600, Administrator Documentation
129
Administration
Feature Configuration
• If Prompt is selected, an incoming pickup call is signaled by an alert on the phone GUI. As
soon as the user goes off-hook or presses the speaker key, the pickup call is accepted.
Alternatively, the user can press the corresponding function key, if configured. If "Notify" is
selected, an incoming pickup call is signaled by an alert on the phone GUI. To accept the
call, the user must confirm the alert or press the corresponding function key, if configured.
• If Notify is selected, an incoming pickup call is signaled by the Pickup call? prompt on the
display and by the flashing Pick up key. To accept the call, the user must confirm the alert
by pressing the OK key or by pressing the flashing Pick up key. The user can then either
lift the handset or press the Speaker key or the Headset key to accept the call.
• If FPK only (default setting) is selected, an incoming call is signaled only by the flashing
Pick up key. To accept the call, the user must press the flashing Pick up key. The Pickup
call? prompt is then shown on the display, and the user can either lift the handset or press
the Speaker key or the Headset key to accept the call.
Administration via WBM
System > Features > Configuration
Administration via Local Phone
|
--- Admin
|
--- System
|
--- Features
|
--- Group pickup
|--- Group pickup tone
|--- Group pickup as ringer
|
--- Group pickup visual
Audio
Group pickup tone allowed
Group pickup as ringer
Group pickup visual alert
BLF alerting
Beep
Prompt
;
;
MLPP ringer
Callback ringer
alert-internal
Impact level ringer