EasyManua.ls Logo

Unify CP200 - Protocol Mode Ipv4;Ipv6

Unify CP200
321 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Administration
A31003-C1000-M101-1-76A9, 03/2016
60 OpenScape Desk Phone CP200/400/600, Administrator Documentation
administration.fm
IP Network Parameters
VLAN ID, DLS address (Vendor specific Information option 17)
DHCPv6 options are preferred in Dual Stack Mode if a parameter is configured both via DHCP
and via DHCPv6, for instance DNS or SNTP server addresses.
Administration via WBM - IPv4
Network > General IP configuration
Set DHCP Enabled to "selected". Afterwards, click Submit.
Administration via Local Phone
or / and
Administration via WBM - IPv6
Network > General IP configuration
Set DHCPv6 Enabled to "selected" (default setting is Enabled). Afterwards, click Submit.
|
--- Admin
|
--- Network
|
--- IPv4 configuration
LLDP-MED Enabled
DHCPv6 Enabled
VLAN discovery
VLAN ID
DNS domain
Primary DNS
Secondary DNS
HTTP proxy
General IP configuration
DHCP
workgroup
DHCP Enabled
Submit
Reset
192.168.1.105
485
IPv4_IPv6
Protocol Mode
;

Table of Contents

Other manuals for Unify CP200

Related product manuals