Unify CP200 Administrator Documentation

Administration
A31003-C1000-M101-1-76A9, 03/2016
66 OpenScape Desk Phone CP200/400/600, Administrator Documentation
administration.fm
IP Network Parameters
3.4.6 Specific IP Routing
To have constant access to network subscribers of other domains, you can enter a total of two
more network destinations, in addition to the default route/gateway. This is useful if the LAN
has more than one router or if the LAN is divided into subnets.
IPv4 Route Configuration
Data required
• Route 1/2 IP address: IP address of the selected route.
• Route 1/2 gateway: IP address of the gateway for the selected route.
• Route 1/2 mask: Network mask for the selected route.
Administration via WBM - IPv4 Configuration
Enter the required data:
• For Route 1: Route 1 IP address, Route 1 Gateway, and Route 1 mask.
• For Route 2: Route 2 IP address, Route 2 Gateway, and Route 2 mask.
Click Submit.
Network > IPv4 configuration
Administration via Local Phone
|
--- Admin
|
--- Network
|
--- IPv4 Configuration
|--- Route 1 IP
|--- Route 1 gateway
|--- Route 1 mask
|
--- Route 2 IP
LLDP-MED Enabled
IP address
Subnet mask
Default route
Route 1 IP address
IPv4 configuration
255.255.255.0
DHCP Enabled
Submit
Reset
192.168.1.105
Route 2 mask
Route 1 gateway
Route 1 mask
Route 2 IP address
Route 2 gateway
192.168.1.2
DHCP lease reuse

Unify CP200 Specifications

General

Brand	Unify
Model	CP200
Category	Telephone
Language	English