administration.fm
A31003-C1000-M101-1-76A9, 03/2016
OpenScape Desk Phone CP200/400/600, Administrator Documentation
181
Administration
Multiline Appearance/Keyset
• if Preselection is selected then the line status is displayed after 1st line press
• if Single button is selected then bridging is invoked (if line busy, bridging enabled)
In case the Preview key is pressed first and then the line key, the Preselection mode configu-
ration is not relevant.
• if Preview mode is activated then the Preview key LED remains on (preview mode must be
deactivated manually by pressing the Preview key again).
• if Preview mode is deactivated then the Preview key LED is turned off after preview timer
expiry
– if Bridging priority= Bridging overrides preview then pressing the busy line key invokes
bridging
– if Bridging priority= Preview overrides bridging then pressing the line key displays the
line status, however pressing the line key twice bridging will be invoked.
3.11.5 Immediate Ring
Enables or disables the preset delay for all line keys. This feature only applies to keyset lines.
The label displayed to the left of the key is defined in Key label <key number>.
Use the Key label <key number> field to define or change the name (label) of the key.
Free Programmable Keys (FPKs) can be configured via the WBM or on the local phone. For
details regarding the different ways to configure program keys, please refer to How to Config-
ure Free Programmable Keys (FPKs).
Administration via WBM
System > Features > Program keys > Immediate ring
3.11.6 Direct Station Select (DSS)
>
This feature requires OpenScape Voice.
>
This feature can be enabled or disabled under System > Features > Feature access
(see Section 3.7, “Feature access”).
Key.label 3
Immediate ring
Immediate ring
Submit
Reset
To Next Page
Loading...
Need help?
General