EasyManua.ls Logo

Unify CP200 - Layer 3; Diffserv

Unify CP200
321 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
administration.fm
A31003-C1000-M101-1-76A9, 03/2016
OpenScape Desk Phone CP200/400/600, Administrator Documentation
55
Administration
IP Network Parameters
Administration via WBM
Network > QoS > Service >
Administration via Local Phone
3.4.1.2 Layer 3 / Diffserv
Diffserv assigns a class of service to an IP packet by adding an entry in the IP header.
Traffic flows are classified into 3 per-hop behavior groups:
1. Default
Any traffic that does not meet the requirements of any of the other defined classes is placed
in the default per-hop behaviour group. Typically, the forwarding has best-effort forwarding
characteristics. The DSCP (Diffserv Codepoint) value for Default is "000000".
2. Expedited Forwarding (EF referred to RFC 3246)
Expedited Forwarding is used for voice (RTP streams) by default. It effectively creates a
special low-latency path in the network. The DSCP (Diffserv Codepoint) value for EF is
"101110".
3. Assured Forwarding (AF referred to RFC 2597)
|
--- Admin
|
--- Network
|
--- QoS
|
--- Service
|--- Layer 2
|--- Layer 2 voice
|--- Layer 2 signalling
|
--- Layer 2 default
Layer 2 signalling
Layer 3 voice
Layer 2 voice
Layer 2
5
QoS
3
Layer 3
EF
;
Service
MLPP
EF
Priority
EF
Immediate
EF
Flash
EF
Flash override
Submit
Reset
Layer 2 default
0
Layer 3 signalling
AF31

Table of Contents

Other manuals for Unify CP200

Related product manuals