Unify CP200 - 2 Startup; Prerequisites; Assembling and Installing the Phone; Shipment

inbetriebnahme.fm
A31003-C1000-M101-1-76A9, 03/2016
OpenScape Desk Phone CP200/400/600, Administrator Documentation
19
Startup
Prerequisites
2Startup
2.1 Prerequisites
The OpenScape Desk Phone CP acts as an endpoint client on an IP telephony network, and
has the following network requirements:
• An Ethernet connection to a network with SIP clients and servers.
• OpenScape Voice server.
• An FTP Server for file transfer, e. g. firmware, configuration data, application software
• A DHCP (Dynamic Host Configuration Protocol) server (recommended).
• DLS (OpenScape Deployment Service) for advanced configuration and software deploy-
ment (recommended).
For additional information see: http://wiki.unify.com/wiki/IEEE_802.1x.
2.2 Assembling and Installing the Phone
2.2.1 Shipment
• Phone
• Handset
• Handset cable
• Subpackage:
– Document "Information and Important Operating Procedures"
– Emergency number sticker
7
Only use switches in the LAN to which the OpenScape Desk Phone CP phone
is connected. An operation at hubs can cause serious malfunctions in the hub
and in the whole network.